top of page

Solahart Premium

Roof Top Solar System

Solahart's roof mounted tank systems save space at ground level and their elegant simplicity make them efficient and reliable. The Solahart Premium Series is a roof mounted solar water heater specifically designed to provide economical service in medium to high solar gain areas. It is available in both open and closed circuit options making it suitable for a wide range of applications, including frost and hard water.

Capacity

The Solahart Premium System is available in 180lt and 300lt capacities to ensure every household has ample hot water.

Mounting Options

With mounting options for flat and pitched roofs; open vented and high pressure, we have a solution for any sitution.

Solahart Premium Roof Top Solar: Key Attributes

feature_images_medsolar_235x166_x2.jpg

Most suitable for areas that receive medium to high levels of solar radiation and are not subject to frost conditions.

In medium solar gain areas that do not experience frost

OPTIMAL PERFORMANCE

feature_images_ceramic_235x166_x2.jpg

Corrosion protection for the water heater’s solar tank is achieved by using a proven, high quality vitreous enamel lining on the tank. Additional protection is gained by the use of a sacrificial anode.

Minimal Maintenance, Maximum Protection

CERAMIC LINED TANK

feature_images_rebates_235x166_x2.jpg

The electric boosted models are equipped with an in-tank element. Alternatively the system can be installed as a pre-heater with an inline Solahart gas booster water heater.

All system are supplied with a backup electric booster

BOOSTER

OPTIONS

feature_images_frost_235x166_x2.jpg

Solahart Closed Circuit Systems are protected against freezing or harsh water conditions by our exclusive ‘Hartgard’ fluid to provide protection against freezing.

Suitable for frost prone areas

FROST

RESISTANT

SHW_SC_SP_Family_Fun_Backyard.jpg

Key Features

The Solahart L Series is ingenious in its simplicity. The black polyester powder coated aluminium absorber collects the sun's heat and transfers it to the water in the 7 risers. Copper is used for the risers for its high thermal conductivity ensuring the maximum amount of heat energy is passed to the water. As the water in the risers is heated, it rises into the tank to be replaced by cooler water from the tank. The solar heated water is then stored ready for use - hot water free from the sun.

The Solahart J Series is specifically designed for frost prone or harsh water chemistry areas. The J Series features Solahart's revolutionary multi-flow collector to extract the maximum amount of energy from the sun. This is used to heat the Hartgard fluid in the collector which rises into the heat exchanger where the heat is transferred to the water inside of the tank. 

bottom of page